Shell Shock Technologies, LLC., an early-stage technology and manufacturing company focused on developing innovative case technologies for the ammunition industry, announces that its revolutionary NAS3 cases  and S3 Reload tools are now available for sale on its website,

“Shell Shock’s NAS3 cases are economically priced, more reliable, stronger, lighter and perform more consistently than brass; they’re the ultimate bang for your buck,” remarked Craig Knight, CEO of Shell Shock Technologies.

NAS3 cases are 50 percent lighter than brass cases, offer greater lubricity and will not abrade, clog, foul, wear-out or damage breach and ejector mechanisms. The cases also offer greater corrosion resistance, tensile strength (2 times stronger) and elasticity than brass. NAS3 cases will not split, chip, crack or grow (stretch) and are fully reloadable with S3 Reload dies. Customers have reported being able to reload NAScases many more times than brass cases. A video can be found on Shell Shock’s website showing 9mm Luger NAS3 cases being reloaded 32 times using S3 Reload  dies.

NAS3 cases have been tested successfully to pressures over 70k psi. NAScases eject cool to-the-touch and can be picked up with a magnet. The head can be colored for branding purposes and easy load identification.

NAS3 cases are “Best in Class” for maintaining consistent velocity between rounds. In an independent test performed by H.P. White Laboratory (a major munitions testing facility), 9mm rounds fired using NAS3 cases achieved a velocity standard deviation of 0.93 fps (124 grain FMJ bullet, 4.2 grains Titegroup powder, 10 rounds, extreme variation 3fps).

New NAS3 cases do not need sizing or flaring (i.e., requiring few stations/operations on the loading machine); they are delivered sized, flared and ready for primer, powder drop, bullet drop and crimp. Reloaders may find that NAS3 cases also require less crimping than conventional brass cases.
NAS3 Case Pricing:

500 New Unprimed 9mm Luger NAS3 Cases

$60.00 ($0.12 per case)

1,000 New Unprimed 9mm Luger

NAS3 Cases

$100.00 ($0.10 per case)

10,000 New Unprimed 9mm Luger

NAS3 Cases

$850.00 ($0.085 per case)

S3 Reload Sizing and Flaring Dies:

Shell Shock’s NAS3 cases can be reloaded using a specially designed set of S3 Reload sizing and flaring dies.

NAS3 cases are manufactured in two-parts that are held together by a high-strength compression joint. Conventional reloading dies can put unnecessary stress on this joint (caused by the way cases are pulled out of the dies using the case rim/extraction groove).

Unlike conventional brass cases, NAS3 cases were designed to enable the highest possible number of reloads. Conventional reloading tools are not suitable for use with NAS3 cases. To maximize the number of achievable reloads, S3 Reload sizing and flaring dies incorporate a spring mechanism that pushes the case out of the die without any risk of damaging the case. This technique puts no stress on the compression joint and does not damage the case rim.

S3 Reload dies are designed to work on most bench-top reloading presses, including Hornady, Lee Precision, Inc., RCBS and Dillon Precision Products, Inc. machinery. S3 Reload dies can also be used with conventional brass cases.

More information on the S3 Reload dies, including instructional videos, can be found at